model. no. rev. ningbo foryard optoelectronics co.,ltd add: no.115 qixin road ningbo zhejiang china zip: 315051 tel: 0086-574-87933652 87927870 87922206 fax: 0086-574-87927917 e-mail: sales@foryard.com ( general) http://www.foryard.com page 1/8 applications: light strips lcd backlight decorative lighting prepared by interior automotive illuminations mobile phones product specification model no. FYLS-0603AURUBC customer approved signatures top led type size (mm):1.6*0.8*0.3 checked by FYLS-0603AURUBC a features: indicators rohs compliant approved by smt package lens type: water clear. http://www.foryard.com pb-free reflow soldering application emitting color:red/blue
model. no. rev. mechanical dimensions notes: 1. dimension in millimeter [inch], tolerance is 0. 25 [.010]. 2.the specifications,characteristics and technical data described in the datasheet are subject to chan ge without prior notice. page 2/8 model no. FYLS-0603AURUBC http://www.foryard.com FYLS-0603AURUBC a
model. no. rev. min. tpy. r 2.00 b 2.80 r 645 b 570 r 631 b 568 r 80 b 30 --- 130 --- r b page 3/8 silicone algainp 2.60 material symbol unit unit 10 note: 2.pay attention about static for ingan 1.luminous intensity is based on the for yard standards. ingan 2? item reflector wire encapsulate gold silicone if = 20ma material gold chip condition if -30 o c +80 o c -40oc +100oc p d iv max. tsol 5 v *pulse width Q Q Q Q 1msec duty Q Q Q Q 1/10 reflow soldering:250 /5sec power dissipation operation temperature topr items reverse voltage absolute maximun ratings(ta=25 o oo o c) 30 100 78 absolute maximum rating a ifp peak forward current* FYLS-0603AURUBC model no. FYLS-0603AURUBC forward current(dc) pd ma ma mw g typical electrical &optical charcteristics(ta=25oc ) tstg storage temperature http://www.foryard.com r 30 100 78 forward voltage vf soldering temperature vr symbol items reverse current ir 3.50 if = 20ma if = 20ma if = 20ma deg vr = 5v u a v nm nm mcd if = 20ma // peak emission wavelength 50% power angle material luminous intensity dominant wavelength
model. no. rev. typical eletrical/optical characteristics curves(t a=25 o oo o c unless otherwise noted) page 4/8 a model no. FYLS-0603AURUBC FYLS-0603AURUBC http://www.foryard.com relative lumionous intensity(lop @max=1) algainp/gap
model. no. rev. packing diagram note: the specifications are subject to change with out notice. please contact us for updated informati on. page 5/8 model no. FYLS-0603AURUBC a http://www.foryard.com FYLS-0603AURUBC
model. no. rev. packing diagram note: the specifications are subject to change with out notice. please contact us for updated informati on. page 6/8 model no. FYLS-0603AURUBC http://www.foryard.com FYLS-0603AURUBC a foryard o p t o e l e c t r o n i c s led ledled led pn:fyls-xxxxx-xx qty:xxxxx pcs date:xxxx/xx/xx gw: xx kg nw: xx kg xxxxxxxxxx rohs rohs rohs rohs attention attention attention attention 0603a 4000/reel 9 reels /box 6 boxes/carton qc: qc pass reel 1 1 . 5 30 18 . 5 foryard o p t o e l e c t r o n i c s www.foryard.com 39.0 3 8 . 0 3 2 . 0 outside label outside label
model. no. rev. precautions for use: page 7/8 and soldering time no more than 2 seconds. http://www.foryard.com 1. storage (2)reflow soldering required if the shelf life has expired model no. FYLS-0603AURUBC before opening the packaging , check for air leaks in the bag. baking is required take the material out of the pac kaging bag before baking. do not open the oven door use a soldering iron of less than 25 watts is recom mended . the iron temperature must be kept below 3 15 handling of an smd led should be done only when the package has been cooled down to below 40 the epoxy resin of an smd led should not contact th e tip of the soldering iron. no mechanical stress should be exerted on the resin portion of an smd led during soldering. temperature profile frequently during the baking process. 2. soldering (1) manual soldering with a soldering iron secondary protection FYLS-0603AURUBC a to prevent moisture absorption into smd leds during the transportation and storage , the leds are pac ked smd leds must be used within 24 hours. if the leds are not within 24 hours after removal from the bag , after the bag is opened, the smd leds must be store d at <30 and < 60% rh. under these conditions, in a moisture-barrier bag. desiccants and a humidit y indicator are packed together with the leds as the shelf life of leds stored in the original seale d bag at <40 and < 90% rh is 12 months. baking is peak temperature temperature pre-heat soak reflow cooling time melting-point
model. no. rev. page 8/8 the appearance and specifications of the product ma y be modified for improvement without notice. 3. static electricity esd shoe strap or an anti-electrostatic glove be us ed when handling the leds. when washing is required, ipa (isopropyl alcohol) s hould be used. all devices, equipment and machinery must be proper ly grounded reverse voltage should not exceed the absolute maxi mum rating on the data sheet. the colour of the le ds the influence of ultrasonic cleaning on the leds de pends on factors such as ultrasonic power and the w ay. high-brightness led light may injure human eyes. av oid looking directly into lighted led no stress should be exerted on the package during soldering. (3) recommend soldering pad design(unit=mm) 4. others is changed slightly an operating current and therm al. this device should not be used in any type of fluid such as water, oil, organic solvent and etc preheat time:100seconds.max must be pre-qualified to avoid damage to t he smd leds. reflow soldering should not be done more t han one time duration above 217 is 80 sec. max average ramp-up rate:4 /sec.max FYLS-0603AURUBC http://www.foryard.com model no. FYLS-0603AURUBC solder=sn63-pb37 average ramp-up rate:4 /sec.max peak preheat temperature:100-150 preheat time:100seconds.max ramp-down rate:6 /sec.max peak temperature:230 time within 5 of actual peak temperature=10 sec. max a solder= pb-free duration above 183 is 80 sec. max time within 5 of actual peak temperature=10 sec. max peak preheat temperature:100-150 ramp-down rate:6 /sec.max peak temperature:250 smd led should not be modified after solde ring. if modification cannot be avoided, the modifi cation static electricity and surge voltage damage the led s. so it is recommended that an esd wrist band,
|
